Anthony Henday Drive - Page 32

basilbrush · #**621** Posted: **Jan 4, 2012, 7:26 AM**

Quote:

Originally Posted by CMD UW

Well they've just made a video for the YHD & Henday interchange. Looks good.

http://www.youtube.com/watch?v=AzFfhad9xcQ

Beautiful!!

Thanks for the link.

kev_427 · #**622** Posted: **Jan 6, 2012, 4:33 AM**

Does anyone know where I can find ultimate stage plans for southwest Anthony Henday Drive? thanks.

CMD UW · #**623** Posted: **Jan 6, 2012, 4:49 AM**

^As in ultimate what? 8-lane cross section? Future interchanges?

craner · #**624** Posted: **Jan 6, 2012, 5:11 AM**

Quote:

Originally Posted by CMD UW

Well they've just made a video for the YHD & Henday interchange. Looks good.

http://www.youtube.com/watch?v=AzFfhad9xcQ

Cool video.
Not much left to finish the ring off now.

feepa · #**625** Posted: **Jan 6, 2012, 5:39 AM**

Quote:

Originally Posted by kev_427

Does anyone know where I can find ultimate stage plans for southwest Anthony Henday Drive? thanks.

there used to be links on the alberta infrastructure page, but they are gone now. IIRC, it was up to 10 lanes wide between YHD and WMD...

kev_427 · #**626** Posted: **Jan 18, 2012, 5:46 PM**

Quote:

Originally Posted by CMD UW

^As in ultimate what? 8-lane cross section? Future interchanges?

I'm looking for the future interchanges between Yellowhead West and Calgary Trail. They don't have them anymore on the government website so I wondered if I could find them elsewhere.

deedub35 · #**627** Posted: **Jan 18, 2012, 9:44 PM**

Quote:

Originally Posted by kev_427

I'm looking for the future interchanges between Yellowhead West and Calgary Trail. They don't have them anymore on the government website so I wondered if I could find them elsewhere.

The RIRO at 111 Avenue will ultimately be an interchange.

The Whitemud Drive interchange will eventually be reworked to replace the lights for the E to N and W to S movements with directional ramps. That won't happen until Whitemud Drive is extended further west and the need for an interchange at Lewis Estates Boulevard/Guardian Road will change the ramp configuration at WMD/AHD.

Terwillegar Drive interchange will be reworked when 170 Street eventually becomes a freeway.
http://www.edmonton.ca/transportatio...eet-study.aspx

127 Street was to have an interchange. There was information on the COE website but I looked just now and it is no longer there. I think it had something to do with council kiboshing the 119 Street bridge over the ravine.

CMD UW · #**628** Posted: **Jan 18, 2012, 11:23 PM**

^No, 127 Street (which will be called Heritage Valley Trail) will have an interchange regardless of the decision to not go ahead with constructing the bridge.

deedub35 · #**629** Posted: **Jan 18, 2012, 11:37 PM**

Quote:

Originally Posted by CMD UW

^No, 127 Street (which will be called Heritage Valley Trail) will have an interchange regardless of the decision to not go ahead with constructing the bridge.

Probably. Not sure why the info was removed from the website though.

thegx · #**630** Posted: **Feb 4, 2012, 7:51 PM**

There are/were plans for a 69 Ave flyover.

rapid_business · #**631** Posted: **Feb 4, 2012, 8:06 PM**

Likely provisions for such, but not a pressing concern considering cost/benefit ratios. Without the traffic demand numbers, it will likely remain that way.

hilman · #**632** Posted: **Oct 10, 2012, 8:54 PM**

Quote:

P3 CANADA FUND TO CONTRIBUTE TO THE COMPLETION OF THE EDMONTON RING ROAD

On behalf of the Honourable Jim Flaherty, Minister of Finance, the Honourable Tim Uppal, Minister of State (Democratic Reform) and Member of Parliament for Edmonton–Sherwood Park, today announced the Government of Canada’s investment in a public-private partnership (P3) to support the construction of the North Saskatchewan River crossing, which is a critical component to the completion of the overall Northeast Anthony Henday Drive. The Minister was joined at the event by the Honourable Ric McIver, Minister of Transportation for Alberta.

Subject to entering into a financing agreement with the Government of Alberta, the Government of Canada will contribute up to $36.8 million through the P3 Canada Fund towards the construction of the North Saskatchewan River crossing. The contractor, Capital City Link General Partnership, will design, build, partially finance, and operate and maintain the project over a 34-year period. The first four years will be the construction phase.

http://www.fin.gc.ca/n12/12-119-eng.asp

ExcaliburKid · #**633** Posted: **Mar 21, 2013, 10:12 PM**

From EJ:
"As a result of near whiteout visibility and poor road conditions, Anthony Henday Drive is being shut down until conditions improve. The closure is expected to last for several hours."
http://www.edmontonjournal.com/news/...696/story.html

Let the good times roll...not sure how this is being enforced.

Hallsy's Toupee · #**634** Posted: **Mar 21, 2013, 11:30 PM**

They just reopened it

Coldrsx · #**635** Posted: **Mar 22, 2013, 12:09 AM**

I am stuck up in Slave Lake, highway closed.

sdimedru · #**636** Posted: **Mar 22, 2013, 1:03 AM**

Quote:

Originally Posted by Coldrsx

I am stuck up in Slave Lake, highway closed.

embrace it! head out for some ice fishin

Airboy · #**637** Posted: **Mar 22, 2013, 2:00 AM**

Quote:

Originally Posted by Coldrsx

I am stuck up in Slave Lake, highway closed.

You can help the Cx guys they'
r stuck to.

240glt · #**638** Posted: **Mar 22, 2013, 2:09 AM**

Left the office at 4:45, home at five past five and in my bunny slippers having a beer and watching the early news with a roast in the oven

Some days I miss working on the road. Today is not one of them

BLACK STAR · #**639** Posted: **Mar 22, 2013, 2:13 AM**

Haha....I cancelled most of my clients and came home early and BBQ Steaks. Flannel is on and Rum in hand!!!! But Im soooooo over this winter...I need closure

Airboy · #**640** Posted: **Mar 22, 2013, 3:16 AM**

got home 5 mintues later than usual. shoveled the drive Then sat back with a bottle of Prosseco in front of the fire, have to thank the Red Deer office for canceling today.