HomeDiagramsDatabaseMapsForum About
     

Go Back   SkyscraperPage Forum > Discussion Forums > Engineering


Reply

 
Thread Tools Display Modes
     
     
  #1  
Old Posted Mar 19, 2015, 3:48 PM
M II A II R II K's Avatar
M II A II R II K M II A II R II K is offline
Registered User
 
Join Date: Aug 2002
Location: Toronto
Posts: 52,200
How to Build a 121-Story Tower That Never Sways

The World's Second-Tallest Building Sways, But Here's Why You Can't Feel It


MAR 18, 2015

By Tim Heffernan

Read More: http://www.popularmechanics.com/tech...t-never-sways/

Quote:
Imagine holding a yardstick at one end. When you flex your wrist even the tiniest bit, the far end of the yardstick whips back and forth. But if you hang a small weight on a spring at that far end, the weight's inertia absorbs some of the yardstick's kinetic energy and the whipping drops to a gentle sway.

Scale that up, a lot, and you have a mass damper, the system that's used to control movement in skyscrapers by reducing both the speed at which the building oscillates and the distance those oscillations cover. Mass dampers consist of large pendulums—usually steel plates bolted together to form a solid chunk—suspended from cables near the top of the building. When the building sways in a gust, the weight's inertia acts as a counterweight, pulling it in the opposite direction.

But a traditional damper wasn't good enough for the new Shanghai Tower. At 2,073 feet it's the second tallest building in the world, after the Burj Khalifa in Dubai. On the upper floors, where the flex is greatest, the oscillations would have been fast and wide enough to cause airsickness (not to mention paralyzing fear). So the building's architects and engineers came up with a solution. They installed a huge, tuned mass damper, the heaviest-ever flex-reducing weight in a building, and paired it with a magnetic system to create the first eddy-current damper used in a skyscraper.

The "tuned" in tuned mass damper refers to an additional element: a control system to limit the weight's own motion, for maximum damping effect. In many buildings this is accomplished by passive damping control, but that has a couple of drawbacks: maintenance costs and the necessity for manual adjustments when vibration frequencies change. So Gensler, the architects of the Shanghai Tower, created the eddy-current damper, a masterpiece of simplicity.

It consists of a 1,076-square-foot copper plate covered with 125 powerful magnets, mounted beneath the suspended mass damper. When the building sways, the 1,000-ton iron weight (360 tons heavier than in the previous largest damper) swings over the magnets, inducing an electrical current in the plate that, in turn, creates an opposing magnetic field, automatically counteracting the weight's motion and further amplifying its damping effect. No active control or outside power source is necessary. The magnetic flip occurs because of a version of Newton's third law called Lenz's law.

.....








__________________
ASDFGHJK
Reply With Quote
     
     
  #2  
Old Posted Nov 9, 2015, 2:02 AM
shaschet shaschet is offline
Inquisitor
 
Join Date: Nov 2015
Location: Pittsburgh
Posts: 5
This is amazing.
Reply With Quote
     
     
  #3  
Old Posted Nov 10, 2015, 1:38 AM
The North One's Avatar
The North One The North One is offline
Registered User
 
Join Date: Sep 2009
Posts: 5,489
This tower as well as the others recently built in Shanghai have been nothing but modern masterpieces. Absolutely incredible structures, it's mind-blowing to think that tiny humans can build these things.
__________________
Spawn of questionable parentage!
Reply With Quote
     
     
End
 
 
Reply

Go Back   SkyscraperPage Forum > Discussion Forums > Engineering
Forum Jump


Thread Tools
Display Modes

Forum Jump


All times are GMT. The time now is 10:55 AM.

     
SkyscraperPage.com - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.