Canada's Tallest Skyscrapers (150M+) - Page 11

koops65 · #**201** Posted **Jan 20, 2017, 6:50 PM**

That's another possibility. I'll think about the options... there's no rush. I usually do an update monthly.

LeftCoaster · #**202** Posted **Jan 27, 2017, 10:32 PM**

Has this one on the Burnaby/Coquitlam border made the list? No official height but at 49 storeys plus a crown and some double height retail floors at grade its probably between 155 - 160M

Quote:

Originally Posted by officedweller

Project website:
(registration only for now)

http://marcon.ca/567/

http://marcon.ca/567/

WhipperSnapper · #**203** Posted **Jan 27, 2017, 10:44 PM**

Yeah, I've seen it in the SSP database.

koops65 · #**204** Posted **Jan 27, 2017, 11:14 PM**

I'm still looking for 41 Roehampton in the database. At 48 floors, it should squeak onto this list...

Innsertnamehere · #**205** Posted **Jan 27, 2017, 11:17 PM**

41 Roehampton is 154m, so yes it does.

koops65 · #**206** Posted **Jan 27, 2017, 11:55 PM**

Thanks!

I made a drawing... but I haven't been able to upload it yet.
I need to make a drawing for Gilmore 2 as well.

WhipperSnapper · #**207** Posted **Jan 28, 2017, 2:52 AM**

Quote:

Originally Posted by Innsertnamehere

41 Roehampton is 154m, so yes it does.

No way. The condo was dissolved. Gotta say height gained but, losing a little architectural value and a lot in diversity of housing.

It's also 161.8 metres including mechanical

**edit.

In case of confusion, the midrise no longer fits the neighbourhood context here. I don't mind the tower proposal. It just looks like other towers down the street. The loft building was different not just to Roehampton but, Toronto as well.

koops65 · #**208** Posted **Jan 28, 2017, 8:34 AM**

My drawing of 41 Roehampton: http://skyscraperpage.com/cities/?buildingID=112968

More height at Y & E if it gets built...

GeneralLeeTPHLS · #**209** Posted **Jan 28, 2017, 2:22 PM**

Quote:

Originally Posted by WhipperSnapper

No way. The condo was dissolved. Gotta say height gained but, losing a little architectural value and a lot in diversity of housing.

It's also 161.8 metres including mechanical

**edit.

In case of confusion, the midrise no longer fits the neighbourhood context here. I don't mind the tower proposal. It just looks like other towers down the street. The loft building was different not just to Roehampton but, Toronto as well.

Yea, that Loft building looks really neat. I was honestly hoping they'd build a plaza or some kind of open space....it would be very central and Roehampton serves ALOT of people and will serve even more in the next 10,15,20 years.

WhipperSnapper · #**210** Posted **Jan 28, 2017, 4:34 PM**

There is open space between this tower and E Condos North. Unfortunately, the towers don't provide any frontages to animate the space and it doesn't (yet) connect to Eglinton. There is a subway entrance at the southern dead end which does provide a practical application and convenient short cut for those heading home.

These proposals collectively are adding downtown densities without the downtown amenities and convenience. I just don't get the attraction. I hope the city is already pursuing to get a new north south street built between Yonge and Redpath and is encouraging active mixed use frontages with the most recent proposals.

YannickTO · #**211** Posted **Jan 28, 2017, 4:51 PM**

Hey Koops, I wondered how do you img an excel spreadsheet as you did on first page? Is it Excel or another program? How do you do it? Thanks

WhipperSnapper · #**212** Posted **Jan 28, 2017, 5:04 PM**

copy and paste it from Excel to a graphics program (Paint).

caltrane74 · #**213** Posted **Jan 28, 2017, 5:05 PM**

Save as a PDF then/Screenshot ?

YannickTO · #**214** Posted **Jan 28, 2017, 5:18 PM**

Thanks guys, but I'm a bit of a computer illiterate and have no idea how to use Paint or PDF files. I'm pretty good with Excel though but not much else. I'll look for guides on YouTube.

WhipperSnapper · #**215** Posted **Jan 28, 2017, 6:59 PM**

Should be simple

highlight area or spreadsheet
right click copy (ctrl c)
open paint
click paste (ctrl v)
save as

YannickTO · #**216** Posted **Jan 28, 2017, 7:07 PM**

Quote:

Originally Posted by WhipperSnapper

Should be simple

highlight area or spreadsheet
right click copy (ctrl c)
open paint
click paste (ctrl v)
save as

Explained like that, awesome

Thanks a lot

koops65 · #**217** Posted **Jan 28, 2017, 8:57 PM**

That's exactly it, except I use paint.net instead of MS Paint.

YannickTO · #**218** Posted **Jan 28, 2017, 9:32 PM**

Quote:

Originally Posted by koops65

That's exactly it, except I use paint.net instead of MS Paint.

Problem is, I followed instructions and I can't edit the PNG file. When I open the saved PNG file, a big long small picture appears, and I can't zoom it in and save it zoomed with the zoom I want. I'm stuck with original zooming.

koops65 · #**219** Posted **Jan 28, 2017, 9:46 PM**

I don't copy/paste the entire spreadsheet at once. I take multiple print-screens and stitch them together one at a time (in paint.net) as I scroll down.

caltrane74 · #**220** Posted **Jan 28, 2017, 11:20 PM**

Just need 1 or 2 more for Toronto to get over 50 for 200 meter towers.

This summer, things are gonna heat up, I have a feeling.